OSIX 3
Suspension for Sennheiser MKH 20-50 microphone series More information
OSIX 3
Suspension dedicated for Sennheiser MKH 50. OSIX 3 has been designed for the SENNHEISER MKH 20-50 microphone series.
It is possible to adapt all the foam windshields normally used with that microphone or the LEO-25 Cinela ball (in that case you have to move forward the female XLR in the cradle by using the rearmost holes to hold the XLR). In accordance to the important microphone low frequency sensitivity (MKH 30-50), the softness of the suspension is maximum and it's unadvised to use longer or heavier microphones.
Front isolator: A3
Rear isolator: B2
In the classical OSIX range:
Ais the general shape of the FRONT isolators in the case of Cradle n°3 (CMIT, 3-60, ...)
Bis the general shape of the BACK isolators in the case of Cradle n°3 (CMIT, 3-60, ...)
Cis the general shape of the FRONT isolators in the case of Cradle n°1 & 2 (CMC, 416, KM100, ...)
Dis the general shape of the BACK isolators in the case of Cradle n°1 & 2 (CMC, 416, KM100, ...)
The cradle number: 1 is short (74 mm including XLR), 2 is medium (94 mm including XLR), 3 is long (124 mm including XLR).
The following number indicates the grade. It goes from 2 (soft) to 4 (hard).
Parameters
Color | Black |
---|---|
Material | Metal, Plastic |
Intended for | Sennheiser MKH 20, Sennheiser MKH 30, Sennheiser MKH 40, Sennheiser MKH 50 |