The KP6CCR, KlassicPro Boompole has a collapsed length of 24″ (61 cm) and an extended length of 6.25′ (1.91 m) and only weighs 1.6 lbs (0.73 kg). This 6-section Boom pole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8″ – 16 male thread. Included is a coiled cable with KlassicPro Right Angle connector (KPCK6) and bottom Male 3-pin XLR side exit (KPCCR). Compatible with various KlassicPro bottom modules (KPTA, KPFT) to to allow for in-field conversion.
Made in the USA.

The New K-Tek Klassic Poles offer increased interchangeability with its removable headpiece. Gone are the soldered and sealed poles of the past. Today’s redesigned headpiece, after removing a standard sized set screw, simply threads on and off the tube smoothly. The cable of choice can be removed or installed—without soldering. The boompole is readily transformed to un-cabled, coil cabled or with a transmitter at the top or the bottom. There are no more time-consuming transformations and no need to purchase a completely new system just to comply with a cabling change.
K-Tek has designed poles that are more rigid and have a shorter collapsed length that is desired in today’s production environment. KlassicPro’s maintain the original light weight of the tubes, yet the new design features added strength. Also, adding a sixth section and wider tubes increases the stiffness and optimizes handling balance. The result is quicker cuing and more user control of the microphone.

Another new benefit is a change to the locking collars. The traditional K-Tek captive collett has been modified with a thicker yet smoother surface allowing for more subtle, gradual extension of each section. A new anodizing process combined with changing the exterior dimples to oval divets gives a better grip and smoother feel when opening and closing each collar. The finish between the tubes has also been modified so the KlassicPro sleekly glides open and closed. New KlassicPro poles are hand-burnished to diffuse handling noise.
Compatible with various KlassicPro bottom modules (KPTA, KPFT) to to allow for in-field conversion.

Dimensions and Weights:

• Collapsed Length: 24" (61 cm)
• Extended Length: 6.25' (1.91 m)
• No. of Sections: 6
• Product Weight: 1.6 lbs. (0.61 kg)
• Top Attachment: 3/8"-16
• Bottom Attachment: Male 3-pin XLR side exit (KPCCR) with Rubber Bumber bottom

Specifications:

• Removable Headpiece
• Sections: 6
• Stronger and more Rigid
• New improved RF shielded internal coiled cable
• Incl. Cable Kit KP6CK and KPCCR
• Compatible with Transmitter Adapter Module (KPTA)
• Compatible with Flow Thru Module (KPTF)