E-shop categories There are 2109 products.

Windbubble Miniature Imitation Fur Windscreen in black color. Windbubble is suitable for microphones with a diameter up to 4.0 mm (2 pcs in the pack)

Boom Pole Quick Release - release easily and quickly any microphone or audio holder from any boom pole

LCD Hood, Dimensions 8 x 4.7 cm 

Suitable for shotgun microphones from 250 mm up to 280mm in length and 19-25mm diameter with a 3-pin XLR connector such as the Sennheiser MKH 60 and Schoeps Super CMIT

Slip-on Windshield with the 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 12 cm from the front of the mic and a diameter of 19-22 mm

Suitable for shotgun microphones from 19-25 mm in diameter

In-line, active "third-order" (18 dB/octave) filter with a "knee" at approximately 60 Hz

Wired Portable Amplifier

Gooseneck Condenser Microphones

Windshield for headset microphones

Power adaptor for eSMART lithium battery with fuel gauge - Hirose connectors

Right angle Hirose style 4 pin male connector

PIANO XLR3 M/F cable (mono)

Lavalier Microphone operated by P48V, XLR-3M output, 3 m cable, with accessories

P48 V phantom I/F part only of COS-11D with stripped end cables

Headworn Microphone with pig tail, 1.8 m cable, Beige color

Sanken CUB-01 Miniature Cardioid Boundary Microphone, XLR-3M connector, Grey color

Mono/Stereo/Wide switchable shotgun microphone without accessories

5.0 Surround Microphone, without cable

Two cardioid microphones in one body

Small size cardioid microphone

Multi-Powered Shotgun Microphone

Denecke TS-3 Timecode Slate

Sound Devices model 970 is a robust, 64-track Dante and MADI-equipped multi-track audio recorder. The half rack, 2U device simplifies applications requiring high-track-count, high-quality audio recordings.